kelvinsmalllogo.jpg (2664 bytes)

Coil Data Per Pole Ratings on Standard Coils

 Table of Contents
CATALOG NUMBER VOLTAGE RESISTANCE (D.C. OHMS) CURRENT (MILLIAMPERES) VOLT AMPERES V/A POWER (WATTS)
30 AMP SERIES
35NO-24A 24 VAC 50 242 5.8 2.9
35NO-120A 120 VAC 1250 53 6.4 3.5
35NO-208A 208 VAC 3400 30 6.2 3.1
35NO-220A 220 VAC 4800 28 6.2 3.8
35NO-277A 277 VAC 7900 20 5.5 3.2
35NO-480A 480 VAC 20000 12 5.9 3.0
35NO-6D 6 VDC 13 462 2.8 2.8
35NO-12D 12 VDC 36 333 4.0 4.0
35NO-24D 24 VDC 176 136 3.3 3.3
35NO-48D 48 VDC 860 56 2.7 2.7
35NO-125D 125 VDC 3400 37 4.6 4.6
35NO-250D 250 VDC 14800 17 4.2 4.2
35NC-24A 24 VAC 36 310 7.4 3.5
35NC-120A 120 VAC 860 65 7.8 3.6
35NC-220A 220 VAC 3400 31 6.8 3.3
35NC-12D 12 VDC 36 333 4.0 4.0
35NC-24D 24 VDC 176 136 3.3 3.3
35NC-48D 48 VDC 560 86 4.1 4.1
35NC-125D 125 VDC 3400 37 4.6 4.6
60NO-24A 24 VAC 50 259 6.2 3.4
60NO-120A 120 VAC 1250 48 5.8 2.9
60NO-208A 208 VAC 3400 30 6.2 3.1
60NO-220A 220 VAC 4800 27 5.9 3.5
60NO-277A 277 VAC 7900 19 5.3 2.9
60NO-480A 480 VAC 20000 12 5.8 2.9
60NO-12D 12 VDC 36 333 4.0 4.0
60NO-24D 24 VDC 176 136 3.3 3.3
60NO-48D 48 VDC 636 75 3.6 3.6
60NO-125D 125 VDC 3400 37 4.6 4.6
60NO-240D 250 VDC 14800 17 4.3 4.3
60NC-24A 24 VAC 36 325 7.8 5.3
60NC-120A 120 VAC 860 69 8.3 4.1
60NC-220A 220 VAC 3400 34 7.5 3.9
60NC-277A 277 VAC 7900 26 7.3 5.5
60NC-12D 12 VDC 36 333 4.0 4.0
60NC-24D 24 VDC 140 171 4.1 4.1
60NC-48D 48 VDC 560 86 4.1 4.1
60NC-125D 125 VDC 3400 37 4.6 4.6
100NO-24A 24 VAC 16 646 15.5 6.7
100NO-120A 120 VAC 380 137 16.4 7.1
100NO-220A 220 VAC 1400 73 16.1 7.5
100NO-277A 277 VAC 2400 55 15.2 7.3
100NO-480A 480 VAC 6300 35 16.8 7.7
100NO-24D 24 VDC 65 369 8.9 8.9
100NO-48D 48 VDC 350 137 6.6 6.6
100NO-125D 125 VDC 2400 52 6.5 6.5
100NC-24A 24 VAC 16 515 12.4 4.2
100NC-120A 120 VAC 380 110 13.2 4.6
100NC-208A 220 VAC 1400 55 11.4 4.2
100NC-240A 240 VAC 1685 49 11.8 4.0
100NC-480A 480 VAC 6300 27 13.0 4.6
100NC-12D 12 VDC 28 433 5.2 5.2
100NC-24D 24 VDC 121 198 4.8 4.8
100NC-48D 48 VDC 380 126 6.1 6.1
100NC-125D 125 VDC 2400 52 6.5 6.5

NOTES:

  1. INRUSH CURRENT=1.5 TIMES THE STEADY STATE CURRENT. (NO INRUSH ON DC COILS)
  2. MINIMUM OPERATING VOLTAGE 90% OF NOMINAL VOLTAGE.
  3. ALL A.C. VOLTAGES ARE AT 50/60 Hz.
  4. FOR OTHER COIL VOLTAGES CONTACT KELVIN
  5. RATINGS SHOWN ARE PER POLE (COILS ARE IN PARALLEL).