Heatron MAX2000 is engineered to provide long life in a variety of applications such as food service equipment, plastics, appliance and medical industries. High watt density capability and reliable termination result in longer heater life.MAX2000 Mica Insulated Heaters are Underwriters (UL), #E91597, and Canadian Standards Association (CSA), #LF 66355-1, recognized. Consult with Kelvin technical staff to discuss your particular requirements.
APPLICATION ADVANTAGES
|
 |
| PERFORMANCE SPECIFICATIONS Volts: 15-575v maximum Watts: 5-80w/in2 is recommended on Strip heaters. Higher watt densities may be achieved on Band heaters depending on the application and operating temperature of the heater. Sheath: Aluminized steel is standard. An optional stainless steel is recommended for temperatures above 750° F Resistance Tolerance: Nema standard +10%-5% Wattage Tolerance: Nema standard +5%-10% Length Tolerance: Up to 24" +/- 1/16" over +/- 1/8" Width Tolerance: +/- 1/16" Standard Band Heater Gap: 3/8" Width Minimum: 5/8" +/- 1/16" Metric sizes available. |
 |
CONSTRUCTION FEATURES
Inorganic Mica- Kelvin uses 100 percent inorganic Mica as insulating material, eliminating potential carbon contaminates found in most Mica binding agents. This allows MAX2000 to operate at higher temperatures and watt densities.
High torque post terminals- Standard post terminals feature unique posi-weld construction, which allows the terminal to be over-tightened without damaging or severing the resistance wire post connection.
High temperature lead wire- MAX2000 Mica insulated heaters feature 850° F (450° C) lead wire. This higher temperature rating prevents premature failure where the leads exit the heater. 250° C lead wire available upon request.
MAX2000 heaters can be custom made to fit specific applications. Holes, cutouts and custom features are designed and manufactured at Heatron.