LOW DENSITY CARTRIDGE HEATERS

APPLICATIONS

Where watt densities of less than 45 watts/square inch can be used

EXAMPLES

Including but not limited to Dies, Heat Sealing, Labeling, Packaging, and Molding

CHARACTERISTICS

• 304 stainless steel sheath and end disc material
• High nickel content element for effective heat transfer
• Ceramic cores providing high dielectric qualities
• Fiberglass leads rated up to 250° C
• Diameters from 3/8" to 3/4"

STANDARD LEAD CONFIGURATION
	Internally connected leads with 12" of fiberglass lead wire.
	Tin plated copper braid protects fiberglass leads from abrasion. The braid is silver soldered in place.
	Galvanized conduit protects fiberglass leads from sharp objects. The hose is silver soldered in place.
	High temperature beads cover internally connected pins.
	Right angle hose protects leads from sharp objects or small amounts of contaminants in area where space is limited.
	Right angle braid offers lead flexibility and abrasion protection where space is limited.
	Post terminals are designed for applications requiring a fast connection using leads, spade terminals, or bus bars. 1/2", 5/8", and 3/4" diameters available

Consult Kelvin for other available lead configurations.

TOLERANCES

Wattage: +5%, -10%

Diameter: +0.000", - 0.009"

Minimum Length: 2"

Maximum Length: 40" (longer lengths-consult Kelvin)

Length: +/- 1/16" 4" and under +/-1/8" over 4"

Wattages below 240Watts are not available at 440Volts or 480Volts

3/8" and 1/2" diameter by 2" long available at 120Volts only

Consult Kelvin for wattages that exceed recommendations.